EMC VNX5500 - Page 46

46 VNX5500 Hardware Information Guide
System component description
Data Mover management module serial console (DB-9) socket connector
The back of the Block and File (Unified) VNX5500 platform Data Mover management
module includes a standard serial console Electronics Industries Association (EIA) RS-232
interface (DB-9) socket connector (labeled with a wrench tool icon on the left). Notice the
orientation of the pins (Figure 39).
Figure 39 Data Mover management module serial console (DB-9) socket connector
Table 27 lists the Data Mover management module Ethernet (DB-9) pin signals used on
the connector.
Table 26 Data Mover management module LEDs
LED Color State Description
Power/Fault Green On Data Mover management module is powered up.
Amber On Data Mover management module has faulted.
Note: LED is always illuminated at powerup, until it is
initialized.
— Off Data Mover management module is powered down.
Link (each
port has
one)
Green On Network connection
— Off No network connection
Activity
(each port
has one)
Amber Blinking Transmit/receive activity
— Off No network activity
Numeric
(7-segment)
display for
enclosure ID
— On Displays the enclosure ID assigned to the Data Mover
enclosure.
Note: Each enclosure is assigned a number at installation.
CNS-001753
Pin 1
5
9
6
Table 27 Data Mover management module (DB-9) socket connector pinout
DB-9 Pin Signal Description
1 CD Carrier detect
2 TXD Transmitted data
3 RXD Received data
4 DTR Data terminal ready
5GNDGround