System component description
VNX5700 Hardware Information Guide 39
Data Mover management module LEDs
Figure 29 shows the LEDs and Table 17 describes them.
Figure 29 Data Mover management module LEDs
2
0
1
#
Port 2 (Link LED)
Port 0 (Link LED)
Numeric display
(blade enclosure ID)
Port 1 (Activity LED)
Power/Fault LED
Port 0 (Activity LED)
Port 2 (Activity LED)
Port 1 (Link LED)
CNS-001671
Table 17 Data Mover management module LEDs
LED Color State Description
Power/Fault Green On Data Mover management module is powered up.
Amber On Data Mover management module has faulted.
Note: LED is always on at powerup, until it is initialized.
—OffData Mover management module is powered down.
Link
(each port
has one)
Green On Network connection
— Off No network connection
Activity
(each port
has one)
Amber Blinking Transmit/receive activity
— Off No network activity
numeric
(7-segment)
display for
enclosure
ID
— On Displays the enclosure ID assigned to the Data Mover
enclosure.
Note: Each enclosure is assigned a number at installation.
To Next Page
Loading...
