EMC VNX5700 - Page 57

I/O modules
VNX5700 Hardware Information Guide 59
Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module
The two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module comes with two
copper ports and two optical ports, one power/fault LED, and a link and activity LED for
each port (Figure 51). The copper ports on this I/O module can interface at speeds of 10,
100, and 1000 Mb/s (1 Gb/s). While the optical ports can interface at a speed of 1 Gb/s.
Figure 51 Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module
1 Push button latch handle 5 SFP+ activity LED (left)
2 Power/fault LED 6 RJ-45 (copper) port (two)
3 SFP+ (optical) port (two) 7 RJ-45 link LED (right)
4 SFP+ link LED (right) 8 RJ-45 activity LED (left)
1 2
3
4
5
6
CNS-001755
7
8