Emec Centurio PRO - Centurio POOL Features; Flocculant Configuration

31
“Centurio POOL”
The POOL version of the CENTURIO controller includes some exclusive features for dosing and controlling the water
in the pool. These features include “FLOCCULANT”, “FILTRATION”, “CHLORINE” and a single channel for temperature
reading based on pH module. In the pH setting submenu (pH / Settings) it is also possible to set the pH priority over the
chlorine dosage.
“Flocculant” (occulation for the removal of colloidal particles)
Through this menu (Settings, Flocculant) it is possible to congure the entire occulation procedure to remove all the
colloidal material.
In order to correctly set this mode, it is necessary to select between the digital and analog outputs those to be used for
the connection of the occulation equipment, set the measurement unit (pulses per minute or minutes per pulse) and the
Pulses per Minute to be produced during occulant activity.