Emec Centurio PRO - Appendix - Probes Modules Connection; Module Wiring Diagrams

34
Appendix - Probes Modules
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
This module is suitable for CONDUCTIVITY PROBE
1) n/a
2) PT100 yellow wire
3) PT100 white wire
4) PT100 brown wire
5) PT100 green wire
6) CD PROBE out red wire
7) CD PROBE in black wire
8) CD PROBE gnd
This module is suitable for mA EXTERNAL DEVICE / LITTLE DIPER TRACER
1) GND (i.e. black wire for tracer probe)
2) +12VDC (i.e. red wire for tracer probe)
3) PT100 yellow wire
4) PT100 white wire
5) PT100 brown wire
6) PT100 green wire
7) -mA signal INPUT (i.e. brown / green wire for tracer probe)
8) +mA signal INPUT (i.e. orange wire for tracer probe)
Warning: Connections must be perfomed by qualified and trained personnel only
2) + 3) PT100 white wire
4) + 5) PT100 green wire
6) SONDE CD red wire
7) SONDE CD black wire
8) SONDE CD gnd
For ECDHLCPT/1
CD
mA