Emerson ACTURA Flex 48330 - Figure 2-5 Connection of Input Terminals; Figure 2-6 Top Cover; Figure 2-7 Connection of 3-Phase AC Power Input

18 Chapter 2 Installation
ACTURA Flex 48330 Power System User Manual
A
C input terminals
Figure 2-5 Connection of input terminals
The AC input cable is fed to the system through the top cover of the cabinet, as
shown in Figure 2-6:
A
C input cable
Cable bracket
Top cover
Figure 2-6 Top cover
There is a cable bracket on the top cover. The input cables are bound to the cable
bracket with a cable tie.
Different cable connection modes
There are 4 AC input terminals. For 3-phase AC power input, just connect the AC
input cables as shown in Figure 2-7:
L1 L2 L3 N
A
C input terminals
Figure 2-7 Connection of 3-phase AC power input