2.1.5 Configuration options
Configure the device to control the following operations:
• How measurement results are reported and how often are they reported
• How and when alerts are generated
• Set the upper and lower limits of the alerts
• Set the units of measurement for the parameters
• Set the primary variable, secondary variable, tertiary variable, and quarternary variable
You can change these configurations from AMS Device Manager or from a field
communicator such as Trex Communicator.
To view the configuration defaults, see Configuration defaults.
Configuration User Guide
July 2020 MHM-97927-PBF
18 MHM-97927-PBF, DRAFT
To Next Page
