Emerson AMS 6500 User Manual

Reference Manual
MHM-97125-PBF-EN, Rev 0
May 2017
AMS 6500 Machinery Health Monitor
A6560R Processor Module and A6510 Signal Input Module

Emerson AMS 6500 Specifications

General

Brand	Emerson
Model	AMS 6500
Category	Monitor
Language	English

Summary

AMS 6500 Machinery Health Monitor

A6560R Processor Module and A6510 Signal Input Module

Details the primary processor and signal input modules for the AMS 6500 system.

Chapter 1 Introduction

Technical Support and Customer Service

Outlines procedures and resources for obtaining technical assistance and customer support.

Chapter 4 Enclosure mounting

Chapter 5 Cabling requirements

Guidelines for conduit installation

Recommendations for improving signal quality

Offers advice on selecting and routing sensor cables to minimize interference and maximize signal integrity.

Chapter 6 Wire terminations

Terminate instrumentation wiring

Wire termination at the AMS 6500

Chapter 7 Hardware configuration

The A6560R and A6510 modules

Describes the capabilities and functions of the A6560R processor and A6510 signal input modules.

Chapter 8 Software configuration

Connect the A6560R CPU to AMS Machinery Manager

Guides users on establishing Ethernet connections and configuring IP addresses for system communication.

Chapter 9 Data collection and analysis

Verify or assign a unit IP address to the Online Server in RBM Network Administration

Chapter 10 Specifications

AMS 6500 Machinery Health™ Monitor specifications

Lists the technical parameters and performance characteristics of the AMS 6500 monitor.

Chapter 11 System calibration

System calibration overview