Gross Scan units conversion (continued)Table 12-1:
Input
Type Input Unit HW Int. RMS/DC Meas. Unit Disp. Unit
DISP V / mil
V / micron
no
no
yes
yes
RMS
RMS
mil
micron
12.2 Spectral analysis
Spectral analysis includes:
• Total Energy
• Energy within a Frequency Range
• Synchronous Energy within a Frequency Range
• Non-Synchronous Energy within a Frequency Range
• HFD
• Relative Synchronous Harmonics
• Average
• Synchronous Peak
Note
Total Energy, Energy within a Frequency Range, Synchronous Energy within a Frequency Range, Non-
Synchronous Energy within a Frequency Range, HFD, Relative Synchronous Harmonics, Average,
Synchronous Peak.RMS, pk, pk-pk Measurement Units are valid and can be freely converted.
Spectral Scan parameters
All Spectral Scan parameters must be AC in nature. It is possible to convert some analysis
type results between Measurement Unit types and Display Unit types.
12.2.1 Spectral units conversion
Spectral units conversionTable 12-2:
Input
Type Input Unit HW Int. SW Int. SW Diff. Disp. Unit
AC V / E.U. no no no E.U.
Data types
102 MHM-97125-PBF-EN, R0
To Next Page
Loading...
