9.12 Change databases when moving the AMS 2600
to a new machine
Because the AMS 2600 is a portable system, ensure that measurements from the
connected machine are stored in the correct database.
CAUTION!
Change the database when you move the AMS 2600 from one monitoring rack or machine to
another. Data from one machine could be stored in the database of another machine if this
sequence is performed incorrectly.
CAUTION!
Changing databases will reinitialize the Transient HDD, which eliminates all stored data.
Extract any data before changing databases.
Prerequisites
Before disconnecting from the first machine, log in to AMS Machinery Manager.
From the Tools tab, click Setup/Communication and open RBM Network Administration.
Procedure
1. In the bottom center panel labeled Online Servers, double-click the server.
The Online Server Setup dialog opens.
2. Click Stop Data Collection.
3. Disconnect the unit from the first machine.
4. Connect the unit to the second machine.
5. In Online Server Setup, click the Edit button next to Machinery Health Manager
Database—not next to Active Units.
6. Select the second machine's database when prompted.
7. In Online Server Setup, click Start Data Collection.
The system will now store any measurements or archives in the second database.
Data collection and analysis
MHM-97125-PBF-EN, R0 89
To Next Page
Loading...
