Emerson AMS - Device Variable Measurements

A. Cover
B. Battery clamp
C. Battery
D. Battery pull tab
E. Base O-ring
Measurements
The device supports the following measurements. Any of these can be configured as a
process variable.
Device variable index
Device variables
1 Z-Velocity
2 Z-Peakvue
3 Machine Temperature
4 Supply Voltage
5 X-Velocity
6 Y-Velocity
7 AP1 (Velocity)
8 AP2 (Velocity)
9 AP3 (Acceleration)
10 AP4 (Accleration)
11 Speed Estimate
12 Mechanical Condition
13 Lubrication Condition
Introduction User Guide
July 2020 MHM-97927-PBF
8 MHM-97927-PBF, DRAFT