Emerson Bettis XTE3000 - Storage and Pre-Installation; Tests to be Carried Out When the Actuator is Received; Storage Procedure

Quick Start Guide
FCIM-20009-EN Rev. 0
March 2023
8
Section 6: XTE3000 – RDM Operation Method
XTE3000 – RDM Operation Method
b) XTE3000 display controls XTE3000
1. XTE3000 display and RDM display will both show as “LOCAL” when XTE3000
change selector knob in “LOCAL” position to have controlled by XTE3000
front display.
2. RDM selector knob and control knob will have no function and shows “LOCAL”.
3. Open valve: Push OPEN button from XTE3000.
4. Close valve: Push CLOSE button from XTE3000.
5. Stop valve: Push STOP button from XTE3000.
Figure 4