3-10 / Service CI-ControlWave EFM
Figure 3-6 - Expansion Comm. Module - Comm. Connector and LED Designations
3.3.3 Wiring/Signal Checks
Check I/O Field Wires at the Card Edge Terminal Blocks and at the field device. Check
wiring for continuity, shorts & opens. Check I/O signals at their respective Terminal Blocks
(see Table 3-3).
Table 3-3 - I/O Field Wiring - Terminal Block Reference List
I/O Subsystem Figures Notes
Digital I/O 2-19 See Section 2.3.4.4
Analog I/O 2-20 See Section 2.3.4.5
HSC Inputs 2-21 See Section 2.3.4.6
Mixed I/O 2-22 See Section 2.3.4.7
3.4 GENERAL SERVICE NOTES
Certain questions or situations frequently arise when servicing the ControlWave EFM.
Some items of interest are provided in Sections 3.4.1 through 3.4.4.
To Next Page
Loading...
