Need help?Do you have a question about the Emerson COPELAND F Series and is the answer not in the manual?
Critical operational and maintenance details for the condensing unit.
Guidelines for safe handling and operation of the equipment.
Sealing in axial and radial directions for improved performance and debris handling.
Involutes wear-in rather than wear-out, maintaining performance over time.
Symmetrical compression process reduces noise, vibration, and pulsation.
Scroll sets separate at shutdown, allowing internal pressure equalization for easier starts.
Porous bronze bearings with PTFE-lead overlay for low friction and lubrication loss tolerance.
Guidelines for safe moving and storage of the condensing unit.
Instructions on how to properly lift the condensing unit.
Procedures for leak testing, removing air/moisture, and adding refrigerant.
Performing an initial pressure test using vacuum and nitrogen.
Advice and best practices for using scroll compressors in applications.
Lists approved Polyolester (POE) oils for the compressors.
Recommended settings for pressure controls based on model and refrigerant.
How to clean condenser fins to maintain performance and efficiency.
Annual checks for leaks in all joints and components.
To Next Page
General