EasyManua.ls Logo

Emerson Copeland Scroll XFAL-030Z-TFC User Manual

Emerson Copeland Scroll XFAL-030Z-TFC
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Copeland Scroll
Outdoor Refrigeration Unit
Installation and reference manual
Models:
XFAL, XFAM, XFAP
1.5 to 6 HP

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Emerson Copeland Scroll XFAL-030Z-TFC and is the answer not in the manual?

Emerson Copeland Scroll XFAL-030Z-TFC Specifications

General IconGeneral
BrandEmerson
ModelCopeland Scroll XFAL-030Z-TFC
CategoryHeat Pump
LanguageEnglish

Summary

Safety Instructions

Quick Setup Guide

User Interface

Button Descriptions and Key Combinations

Details the functions of each button and key combinations on the controller.

User Interface Sub-sections

Alarm Menu

Details how to access and navigate the alarm menu to view stored alarms.

Defrost Controls

Explains the parameters and logic for the unit's defrost cycle.

Over-Current Protection

Describes how the controller protects the compressor from over-current conditions.

Compressor Internal Thermal Protection

Explains detection and response to compressor internal thermal protector trips.

Programming a HOT-KEY (Upload)

Explains how to upload controller settings from a HOT-KEY, overwriting existing data.

Incorrect Phase Sequence Protection (3 Phase Only)

Explains protection against incorrect phase sequence in three-phase systems.

Fixed High Pressure Control

Details the non-adjustable high pressure switch control mechanism.

Programming a Controller Using a HOT-KEY (Download)

Describes how to download controller settings from a HOT-KEY to the unit.

Loss of Phase Protection - Current (3 Phase Only)

Details protection against loss of a phase in three-phase systems.

Open Run Circuit (Single Phase Only)

Describes protection against an open run circuit in single-phase systems.

Enhanced Vapor Injection (EVI)

Introduces the EVI system for low-temperature units and its operational logic.

Medium Temperature DLT Protection

Details the liquid injection system for preventing compressor overheat in medium temp units.

Low Temp EVI Discharge Line Temperature Protection

Describes the protection mode for high discharge line temperature in EVI systems.

Over/Under Voltage Protection

Explains protection against voltage fluctuations outside the acceptable range.

Physical and Installation Requirements

Wiring Diagrams

Wiring Diagrams (Continued)

Alarm Codes

Parameters

Related product manuals