Emerson Damcos KC 65 - Page 34

Quick Installation Guide Disassembling the Actuator
QIG 8000-81-003 Ed 01 February 2020
32
5. Dismount the actuator
spindle:
– Use a fork wrench to
hold the actuator
spindle (a)
Caution! Only use fork
wrench or pliers
on the wrench-
grip surfaces (a)!
– Locate the screw
inside the actuator by
use of a long hex key.
– Still holding the actu-
ator with the fork
wrench, now turn the
hex key to loosen the
screw inside the actu-
ator.
– When the screw is
loosened, still hold-
ing the hex key,
unscrew and remove
the actuator spindle.