Overview Quick Installation Guide
February 2020 QIG 8000-81-003 Ed 01
7
Overview
A DPI - Direct Position Indicator
1
(referred to as ‘DPI’ in this document)
B Control block
2
C Fittings for hydraulic hand pump connection
D Bleed valve
E Visual indicator
F Screws (4 pcs)
G Valve bonnet/stem top flange
H Actuator spindle
I Indicator bushing
J DPI socket
K Yoke
L Screw
Parts Delivered
• Actuator with/without electrical indicator (A)
• Build-in indicator bushing (I)
• Mounting instruction (this document)
1. Some actuators are equipped with visual indicator only (E) and no electrical indicator (A). This
instruction covers actuators equipped with an electrical indicator (A). Most steps and illustrations
will however be applicable for installation of actuators without the electrical indicator (A).
2. Some models only!
To Next Page
Loading...
