20
LISTENING TO EXTERNAL SOUND SOURCES
Connect your external sound source (cassette player, MD player, TV, VCR, etc) to
the AUX (Auxiliary) Input jacks on the back panel. (Connection cables are not
included.) Press the ON/OFF button on the front panel or remote control to turn the
power ‘On’, and press the AUX button on the front panel or remote control. Switch
your external source ‘On’ and operate it as you would normally. Adjust the VOLUME
and EQ control as desired.
NOTE: The correct time appears on the display when the AUX function is selected.
STEREO HEADPHONE JACK
Connect stereo headphones (not included) to the PHONES Jack for private listening
without disturbing others. Reduce the volume to a low level before putting on the
headphones and then gradually increase the volume to a comfortable listening
level. The speakers are automatically disconnected when headphones are in use.
ES11_ib022503.p65 25/2/2003, 16:0520
To Next Page
Loading...
