Emerson FB2200 Flow Computer Quick Start Guide
D301788X012
March 2019
30
Securing the Battery to the Pad
For this type of battery compartment, a hook-and-loop pad on the back of the battery secures the
battery to the back of the battery compartment.
1. Pick up the battery and align it with the lower left edge of the battery compartment. Press
the battery against the back of the compartment so the pad on the back of the battery
secures to the back of the battery compartment.
Battery Pack Attached to Compartment
2. Route the wires of the free portion of the battery cable so that they sit completely inside the
open area at the top of the battery compartment.
3. Rotate the electronics assembly up against the battery compartment and with a torque value
of 2 to 4 in-lbs (0.2 to 0.5 N m) to close the compartment.
4. Close the enclosure.
To Next Page
Loading...
