Emerson FB3000 RTU Quick Start Guide
D301859X012
April 2021
23
Defining Meters and Stations
The Fluid Selection page lets you define what kinds of meters you want to use and also lets you
establish a framework for how your meters are assigned to stations.
First you need to choose the fluid type(s) and the number of DP and linear meters.
The total number of DP and linear meters cannot exceed the Maximum Meters value. The system
shows the number of meters you’ve defined in the
Used/Allocated meters
field.
If you want a station for each meter, choose a Station layout of One per each meter.
Once you click Apply, the Guided Setup Wizard Navigation pane updates the tree to show a station
for each meter.
To Next Page
Loading...
Need help?
General
