Instruction Manual
D200156X012
4194HA, HB, HC Controllers
July 2018
92
Key Description
300 Clip
301 Lever spring seat
302 Lever spring
303* Groove pin
304 Switch lever
305 Switch lever cover plate
306* Closing plate gasket
307 Closing plate
308 Machine screw, pan hd (2 req'd)
309 Tubing ass'y
310 Lithium grease (not furnished with controller)
311 Anti‐seize sealant (not furnished with controller)
312* O‐ring (3 req'd)
313 Auto/Manual Scale
314 Machine screw, fill hd
315 Machine screw, fill hd
316 Machine screw
Controller Mounting Parts
Note
Contact your Emerson sales office
or Local Business Partner for any
additional parts required for controller mounting.
Note
Specify quantity of fittings required.
Fittings
For 1/4 NPT or 3/8 NPT tubing
Connector
Elbow
*Recommended spare parts
Emerson Automation Solutions
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay, 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
E 1985, 2018 Fisher Controls International LLC. All rights reserved.
Fisher is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson Automation Solutions,
Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.
Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
To Previous Page
Loading...
