Emerson Fisher Fieldvue DVC6010f

www.Fisher.com
Errata Sheet
for
FIELDVUE
R
DVC6000f Series Digital Valve Controllers Quick Start Guide, Form 5778
(Quick Start Guides dated December 2005 and April 2005)
and
FIELDVUE
R
DVC6000f Series Digital Valve Controllers Instruction Manual, Form 5774
(Instruction Manuals dated March 2006, March 2005, and December 2004)
NOTE: This errata sheet replaces all existing
errata sheets for the DVC6000f Quick Start Guide
and Instruction Manual.
The first two pages of this errata sheet cover all
versions of the DVC6000f quick start guide and
instruction manual listed above. Refer to the
appropriate quick start guide or manual for all other
information and instructions pertaining to the
DVC6000f digital valve controller.
The NEPSI certification information found on
page 3, 4, and 5 of this errata sheet is only
applicable to the current DVC6000f quick start
guide (December 2005) and instruction manual
(March 2006).
Note
Neither Emerson, Emerson Process
Management, nor any of their affiliated
entities assumes responsibility for the
selection, use, and maintenance of any
product. Responsibility for the
selection, use, and maintenance of any
product remains with the purchaser
and end-user.
DVC6000f Quick Start Guide Form − 5778
For Quick Start Guides dated December 2005
and April 2005
Replace figure 5-5. ATEX Nameplate; Intrinsically
Safe, Dust with the updated figure below. The
intrinsically safe maximum voltage entity parameter
(U
i
) has been corrected to read 24 VDC.
TYPE DVC6010F, DVC6020F, DVC6030F, DVC6010FS, DVC6020FS, DVC6030FS
Figure 5−5. ATEX Nameplate; Intrinsic Safety, Dust
Errata Sheet
April 2007
DVC6000f Series

Emerson Fisher Fieldvue DVC6010f Specifications

General

Brand	Emerson
Model	Fisher Fieldvue DVC6010f
Category	Controller
Language	English

Summary

Introduction

Scope of Manual

Details specifications, installation, operation, and maintenance for DVC6000f Series digital valve controllers.

Instrument Description

Overview of DVC6000f Series digital valve controllers for FOUNDATION fieldbus.

Specifications

Technical specifications for DVC6000f Series digital valve controllers.

Installation

Special Instructions for Safe Use and Installation in Hazardous Locations

Provides specific safety conditions for hazardous locations based on approvals (CSA, FM, ATEX, IECEx).

Mounting

Guidelines for mounting DVC6000f Series controllers on various actuator types.

Pressure Connections

Electrical Connections

375 Field Communicator Basics

Online Operation

Describes how to view device data and connect to a Fieldbus loop.

Working with Device Blocks

Function Blocks

Transducer Block

Overview of the transducer block, its modes, and parameters.

Resource Block

Information on the resource block, including modes, write lock, and alarms.

Analog Output (AO) Function Block

Details on the AO function block, including modes, mode handling, and parameter list.

PID Function Block

Explanation of the PID function block, its modes, and parameters.

Input Selector (ISEL) Function Block

Output Splitter (OS) Function Block

Analog Input (AI) Function Block

Information on the AI function block, including modes, signal conversion, and advanced features.

Multiple Analog Input (MAI) Function Block

Discrete Output (DO) Function Block

Discrete Input (DI) Function Block

Calibration

Travel Calibration

Procedures for calibrating travel: Auto and Manual.

Relay Adjustment

Travel Sensor Adjust

Procedures for adjusting the travel sensor using a multimeter or Field Communicator.

Pressure Sensor Calibration

Procedures for calibrating supply, output A, and output B pressure sensors.

Maintenance and Troubleshooting

Module Base Maintenance

Procedures for removing and replacing the module base assembly.

SubModule Maintenance

Maintenance procedures for I/P converter, PWB assembly, and pneumatic relay.

Terminal Box

Travel Sensor

Instrument Troubleshooting

Troubleshooting guide for common instrument issues.

Parts

Parts Ordering

Parts Kits

Parts List

Comprehensive list of common parts, submodules, and assemblies.

FOUNDATION fieldbus Communication

Function Block Overview

Explains function blocks, instrument-specific blocks, and resource/transducer blocks.

Block Modes

Network Communication

Device Description (DD) Installation

Device Descriptions and Methods

Installing DDs on a DeltaV ProfessionalPLUS Workstation

Operating with DeltaV

Getting Started with DeltaV Host Systems

Steps for initial setup, including DD installation and device commissioning.

Accessing Parameters

Bringing the Device On-Line

Loop SchematicsNameplates

CSA Schematics

FM Schematics

ATEX Nameplates

IECEx Nameplates