Emerson Fisher Fieldvue DVC6020f User Manual

www.Fisher.com
Errata Sheet
for
FIELDVUE
R
DVC6000f Series Digital Valve Controllers Quick Start Guide, Form 5778
(Quick Start Guides dated December 2005 and April 2005)
and
FIELDVUE
R
DVC6000f Series Digital Valve Controllers Instruction Manual, Form 5774
(Instruction Manuals dated March 2006, March 2005, and December 2004)
NOTE: This errata sheet replaces all existing
errata sheets for the DVC6000f Quick Start Guide
and Instruction Manual.
The first two pages of this errata sheet cover all
versions of the DVC6000f quick start guide and
instruction manual listed above. Refer to the
appropriate quick start guide or manual for all other
information and instructions pertaining to the
DVC6000f digital valve controller.
The NEPSI certification information found on
page 3, 4, and 5 of this errata sheet is only
applicable to the current DVC6000f quick start
guide (December 2005) and instruction manual
(March 2006).
Note
Neither Emerson, Emerson Process
Management, nor any of their affiliated
entities assumes responsibility for the
selection, use, and maintenance of any
product. Responsibility for the
selection, use, and maintenance of any
product remains with the purchaser
and end-user.
DVC6000f Quick Start Guide Form − 5778
For Quick Start Guides dated December 2005
and April 2005
Replace figure 5-5. ATEX Nameplate; Intrinsically
Safe, Dust with the updated figure below. The
intrinsically safe maximum voltage entity parameter
(U
i
) has been corrected to read 24 VDC.
TYPE DVC6010F, DVC6020F, DVC6030F, DVC6010FS, DVC6020FS, DVC6030FS
Figure 5−5. ATEX Nameplate; Intrinsic Safety, Dust
Errata Sheet
April 2007
DVC6000f Series

Emerson Fisher Fieldvue DVC6020f Specifications

General

Brand	Emerson
Model	Fisher Fieldvue DVC6020f
Category	Controller
Language	English

Summary

Errata Sheet

DVC6000f Quick Start Guide Correction

DVC6000f Instruction Manual Corrections

Instruction Manuals dated March 2006 and March 2005

Instruction Manuals dated December 2004

NEPSI Approvals and Hazardous Location Instructions

Special Instructions for Safe Use and Installations in Hazardous Locations

Details specific installation requirements and conditions for safe use based on agency approvals.

NEPSI Intrinsic Safety Notes

Provides notes for safe use of certified products, including Ex marking and certificate number.

Installation Overview

Special Instructions for Safe Use and Installation in Hazardous Locations

Provides safety instructions tailored for specific hazardous location certifications like CSA, FM, ATEX, and IECEx.

Mounting Instructions

Details mounting procedures for various DVC6000f series digital valve controllers on different actuator types.

375 Field Communicator Basics

Online Operation

Basic Setup and Tuning

Basic Setup Procedures

Covers essential setup steps including Transducer Block Mode, Protection, and Setup Wizard.

Auto Travel Calibrate

Procedure to automatically calibrate the instrument's travel using valve and actuator stops.

Tuning - Stabilize/Optimize

Method to improve valve response by adjusting tuning sets for instability or sluggishness.

Detailed Setup / Blocks

Resource Block

Details the hardware-specific characteristics and operational parameters of the DVC6000f Series digital valve controller.

Transducer Block

Explains how the transducer block accepts signals, performs setup, calibration, and diagnostics.

Analog Output (AO) Function Block

PID Function Block

Input Selector (ISEL) Function Block

Output Splitter (OS) Function Block

Analog Input (AI) Function Block

Multiple Analog Input (MAI) Function Block

Discrete Output (DO) Function Block

Discrete Input (DI) Function Block

Calibration Procedures

Travel Calibration

Covers procedures for calibrating valve travel, including Auto and Manual methods.

Relay Adjustment

Travel Sensor Adjust

Provides procedures for adjusting the travel sensor, including methods using a multimeter or Field Communicator.

Pressure Sensor Calibration

Describes calibration procedures for supply, output A, and output B pressure sensors.

Maintenance and Troubleshooting

Instrument Troubleshooting

Provides guidance on diagnosing and resolving common instrument issues.

Module Base Maintenance

Details procedures for removing and replacing the module base assembly.

Submodule Maintenance

Covers maintenance for submodules like I/P converter, PWB assembly, and pneumatic relay.

Travel Sensor Replacement

Operating with DeltaV

Getting Started with DeltaV Host Systems

Starting Methods

Accessing Parameters

Simulate PlantWeb Alarms