www.Fisher.com
ATEX Hazardous Area Approvals
Fisher
™
FIELDVUE
™
DVC6200 Series
Digital Valve Controllers
Hazardous Area Approvals and Special Instructions
for “Safe Use” and Installations in Hazardous Locations
Certain nameplates may carry more than one approval, and each approval may have unique installation/wiring
requirements and/or conditions of “safe use”. These special instructions for “safe use” are in addition to, and may
override, the standard installation procedures. Special instructions are listed by approval type.
Note
This information supplements the nameplate markings affixed to the product and the DVC6200 Series quick start guide
(D103556X012
), available from your Emerson sales office or at Fisher.com.
Always refer to the nameplate itself to identify the appropriate certification.
Approval information is for both aluminum and stainless steel constructions.
WARNING
Failure to follow these conditions of “safe use” could result in personal injury or property damage from fire or explosion
and area re‐classification.
WARNING
To avoid static discharge from the plastic cover when flammable gases or dust are present, do not rub or clean the cover
with solvents. To do so could result in a spark that may cause the flammable gases or dust to explode, resulting in personal
injury or property damage. Clean with a mild detergent and water only.
Instruction Manual Supplement
D104205X012
DVC6200 Digital Valve Controllers
November 2020
SIS
To Next Page
Need help?
General
