MR95 Series
Facebook.com/EmersonAutomationSolutions
LinkedIn.com/company/emerson-automation-solutions
Twitter.com/emr_automation
Webadmin.Regulators@emerson.com
Emerson Automation Solutions
For further information on the current
PED revision see Bulletin: D103053X012
or scan the QR code.
The distinctive diamond shape cast into every spring
case uniquely identifies the regulator as part of the
Fisher™ brand and assures you of the highest-quality
engineering, durability, performance, and support.
Fisher.com
Americas
McKinney, Texas 75070 USA
T +1 800 558 5853
+1 972 548 3574
Europe
Bologna 40013, Italy
T +39 051 419 0611
Asia Pacic
Singapore 128461, Singapore
T +65 6777 8211
Middle East and Africa
Dubai, United Arab Emirates
T +971 4 811 8100
Figure 1. Type MR95L, 1/4 NPT and DN 15 to 25 /
1/2 to 1 In. Body Sizes Assembly
APPLY LUBRICANT OR SEALANT
(1)
:
T = THREAD LOCKER
L1 = GENERAL PURPOSE PTFE OR LITHIUM GREASE
L2 = ANTI-SEIZE COMPOUND
L4 = GRAPHITE SEALANT
GF04915
APPLY LUBRICANT
(1)
:
L1 = GENERAL PURPOSE PTFE OR LITHIUM GREASE
L2 = ANTI-SEIZE COMPOUND
L4 = GRAPHITE SEALANT
GF04918
Figure 2. Types MR95HD and MR95HDP,
1/4 NPT and DN 15 to 50 / 1/2 to 2 In. Body Sizes Assembly
CONTROL LINE OPTION
METAL DIAPHRAGM OPTION
6B
52
6C
6A
12
18
18
13
64
19
L1
SEALED ADJUSTING
SCREW OPTION
TEE-HANDLE OPTION
COMPOSITE SEAT OPTION
50
22
4B
4A
L2
17
12
1
20
6
9 L2
15
2
11
16
7
4
26
63
L2
L2
(2)
L1
L4
21C
21A
21B
T
3
L2
5
L2
OR
(3)
L2
L2
L1
19
41
33
L3 36
L1
37
11
2
16
7
4
26
63
L2
L1
L4
3
L2
5
43
32
38
44
35
34
39
40
42
9
8
12
1
20
6
12
52
6C
6A
6B
4B
4A
OR
(3)
L2
(2)
METAL DIAPHRAGM OPTION
CONTROL LINE OPTIONCOMPOSITION SEAT OPTION
1. Lubricants and sealants must be selected such that they meet the temperature requirements.
2. Apply L2 (anti-seize compound) on key 16 for Stainless steel bolts.
3. Apply L4 (graphite sealant) instead of L1 (general purpose PTFE or lithium grease) on key 63 for graphite ring.
D103587X014 © 2014, 2019 Emerson Process Management Regulator
Technologies, Inc. All rights reserved. 01/19.
The Emerson logo is a trademark and service mark of Emerson
Electric Co. All other marks are the property of their prospective owners.
Fisher™ is a mark owned by Fisher Controls International LLC, a
business of Emerson Automation Solutions.
The contents of this publication are presented for information purposes
only, and while effort has been made to ensure their accuracy, they are
not to be construed as warranties or guarantees, express or implied,
regarding the products or services described herein or their use or
applicability. All sales are governed by our terms and conditions, which
are available on request. We reserve the right to modify or improve the
designs or specications of our products at any time without notice.
Emerson Process Management Regulator Technologies, Inc does not
assume responsibility for the selection, use or maintenance of any
product. Responsibility for proper selection, use and maintenance of any
Emerson Process Management Regulator Technologies, Inc. product
remains solely with the purchaser.
To Previous Page
Loading...
