Emerson IC695PNC001-BFBE1 2 Important Product Information

GFK-2573AD May 2023
4
Installation in Hazardous Areas
The following information is for products bearing the UL marking for Hazardous Areas or ATEX marking for
explosive atmospheres:
CLASS 1 DIVISION 2 GROUPS ABCD
This equipment is an open-type device and is meant to be installed in an enclosure suitable for the
environment that is only accessible with the use of a tool.
Suitable for use in Class I, Division 2, Groups A, B, C, and D Hazardous Locations, or non-hazardous
locations only.
WARNING
EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2.
WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE REPLACING OR WIRING MODULES.
ATEX Zone 2
This module must be mounted in an enclosure certified in accordance with EN60079-15 for use in Zone 2,
Group IIC, and rated IP54. The enclosure shall only be able to be opened with the use of a tool.

Emerson IC695PNC001-BFBE1 2 Specifications

General

Brand	Emerson
Model	IC695PNC001-BFBE1 2
Category	Controller
Language	English