Need help?Do you have a question about the Emerson insinkerator W152 and is the answer not in the manual?
General| Brand | Emerson |
|---|---|
| Model | insinkerator W152 |
| Category | Water Heater |
| Language | English |
Explanation of terms like Standby Heat Loss, First Hour Rating, and Usable Hot Water.
Lists essential tools and parts needed for installation.
Lists optional tools and parts that might be useful for installation.
Ensuring power is off, identifying location, and checking clearance for the water heater.
Choosing a location that minimizes damage from potential leaks.
Selecting a vertical mounting spot near a grounded 120-volt outlet.
Verifying the wall or cabinet can support the full weight of the heater.
Marking, mounting the bracket, and hanging the heater on the wall.
Selecting a vertical mounting spot near a grounded 120-volt outlet.
Verifying cabinet strength and using blocks for drainage clearance.
Connecting the cold water line to the 1/2" NPT female fitting.
Connecting the hot water line to the 1/2" NPT female fitting on the tank.
Guidance on installing the T&P valve, consulting local codes.
Ensuring the hot water drain screw is tight before filling.
Filling the heater and purging air by opening a hot water faucet.
Ensuring all electrical connections are tight and leak-free.
Locating the switch and turning the heater to the 'ON' position.
Instructions on how to adjust the thermostat and reset the high limit.
Steps for draining the unit for extended periods or in freezing conditions.
Periodic draining and checking of the temperature and pressure relief valve.
Checks the owner can perform and contact information for service.
Covers defects in material or workmanship for one year after installation.
Details on warranty scope and what is not covered.
Conditions for warranty validity and exceptions that void it.
How to obtain service under the warranty.
Excludes incidental/consequential damages; specific legal rights apply.
Covers tank leakage due to defects for five years after installation.
Details replacement tank availability and what is not covered.
Conditions for warranty validity including installation and usage.
How to obtain service for tank leakage issues.
Excludes liability for damages; states legal rights may vary.
Explains specific legal rights granted by the warranty.
Fields for recording Model Number, Serial Number, and Date Installed.
Checks for tripped breakers, loose connections, and reset button status.
Actions for overheating, checking thermostat seating, and unplugging power.
Guidance on addressing relief valve weeping or dripping.
Important notes on cord usage, grounding, and adapter use for safety.
To Next Page
