Emerson LD200EM8 - A. TV Rating

6-2 A7440EA
The following adjustment normally are not
attempted in the field. Only when replacing the
LCD Panel then adjust as a preparation.
2. Flicker Adjustment
1. Enter the Service mode.
2. Press [2] button on the service remote control unit.
The following screen appears.
3. If Flicker Adjustment is not fit, the screen become
the following.
4. Press [CH o / p ] buttons on the remote control
unit so that flash stops.
D2-BRT
[SETUP] → [5]
128
D2-CNT 180
D2-CLR-R 85
D2-CLR-B 85
D2-TNT 128
D2-SHR 112
D3-BRT
[SETUP] → [6]
120
D3-CNT 170
D3-CLR-R 80
D3-CLR-B 80
D3-TNT 128
D3-SHR 112
DT-BRT
[SETUP] → [7]
137
DT-CNT 190
DT-CLR-R 70
DT-CLR-B 75
DT-TNT 128
DT-SHR 112
VCOM [2] 128
COR(C/D1)
[VOL n] → [1]
128
C-COR(C/D2) 128
COB(C/D1)
[VOL n] → [3]
128
C-COB(C/D2) 128
DR(C/D1)
[VOL n] → [4]
128
C-DR(C/D2) 128
DB(C/D1)
[VOL n] → [6]
128
C-DB(C/D2) 128
Item
Button
(on the service
remote control)
Data
Value
FLASH (Go and Off)