Document Part # 026-4167 Rev 1 Page 4 of 10
©2021 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.climate.emerson.com/ for the latest technical documentation and updates.
Direct Connect Instructions - Connect your laptop to E3’s Ethernet port ETH 1
All configuration can be accomplished through the E3’s built-in display or through a laptop, PC, or tablet. On your PC:
1. Under Control Panel - Network and Sharing Center, select Change adapter settings.
2. Select the Local Area Connection port being used.
3. Select Properties.
Figure 5 - E3 and XR75 Wiring
To Next Page
Loading...
