14 Unidrive M200-201 Quick Start Guide
Issue Number: 6
Otherwise, the parameter will return to its pre altered value on exit from edit mode. All parameters
are saved if this parameter changes.
Figure 4-1 Pr 00.005 = AV (50 Hz)
1
2
4
0V
Voltage speed reference
Voltage speed reference
input (AI 2)
input (AI 1)
5
+ 10 V output
7
9
10
Digital output
(zero frequency)
Drive enable
11
12
13
14
Run reverse
Run forward
Analog output 1
(motor frequency)
Analog input 1/
input 2 select
+ 24 V output
10k
10k
Unidrive M200 201 Quick Start Guide English Iss6.book Page 14 Thursday, September 10, 2015 1:48 PM
To Next Page
Loading...
