Emerson Micro Motion 5700 Installation Instructions

5700 ATEX Installation Instructions
EB-20025742 Rev. AC December 2015
8 of 12
3) Parameters (continued)
3.5.3 Temperature circuit (J1 in J-box, RTD+ VIO; RTD- ORA; RTD-SIG
YEL)
voltage Uo DC 17,3 V
current Io 19,26 mA
power Po 83,3 mW
for group IIC
max. external capacitance Co 353 nF
max. external inductance Lo 95,8 mH
max. external induct/resist Lo/Ro 0,42 mH/
for group IIB and IIIC
max. external capacitance Co 2,06 F
max. external inductance Lo 383 mH
max. external induct/resist Lo/Ro 1,68 mH/
3.6 Sensor circuits for type 5700I1********; “nA”:
3.6.1 Drive circuit; (J2 in J-box, DR+ BRN; DR- RED)
Rated voltage DC 10,5 V
Rated current 80 mA
3.6.2 Pick-off circuits (J1 in J-box, LPO-WHT, LPO+ GRN; RPO+ BLU;
RPO- GRY)
Rated voltage DC 17,3 V
Rated current 6,92 mA
3.6.3 Temperature circuit(J1 in J-box, RTD+ VIO; RTD- ORA; RTD-SIG
YEL)
Rated voltage DC 17,3 V
Rated current 19,26 mA
3.7 Ambient temperature range
Type 5700*1***VA*** Ta -40°C to +65°C

Emerson Micro Motion 5700 Specifications

General

Brand	Emerson
Model	Micro Motion 5700
Category	Transmitter
Language	English