©2017 Nelson Heat Tracing Systems
GA2497 Rev.5
Maintenance
CM-2201/CM-2202
10.0 Maintenance
The CM-2201/CM-2202 should be regularly maintained as
follows:
a)
Check fit of door gasket and adjust as required. Clean
door gasket.
b)
Verify that moisture is not entering enclosure; repair as
required.
c)
Check terminals to ensure connections are secure.
d)
Check wiring for any signs of overheating.
e)
Clean front panel with mild soap on damp cloth.
Do not use any cloth from synthetic material or similar.
On
the cleaning process the front label may charge
electrostatic
and
by touching the front panel may generate sparks.
24
To Next Page
Loading...
