31
4.) Depress the MONTH/DATE button. The display will change from ‘Time’ to
‘Month/Date’ (MM/DD).
While holding the MONTH/DATE button, press the button to set the
display to the correct Month and Date. The Day indicator will change
automatically as you adjust the Month/Date settings. When the correct Month
and Date appear on the display, release the buttons.
5.) While holding the TIME button, press the H (Hour Digit) button or M (Minute
Digit) buttons to set the display to the correct Time, then release the button.
Be sure to confirm that you have set the time correctly to ‘AM’ or ‘PM’ by
observing the AM indicator.
6.) After you set the Time, reconfirm that the Day, and Month/Date displays are
still correct. Make final adjustments if necessary.
The SmartSet
®
clock memory is now reset and the new lithium battery will maintain
it for the next 5 to 8 years, depending on the number and duration of the power
outages you experience.
IMPORTANT NOTE:
After resetting the clock, don’t forget to reset your wake up times, and alarm
mode settings, and sleep timer settings as well.
Lithium Battery Precautions
• Dispose of the old battery properly. Do not leave it lying around where a
young child or pet could play with, or swallow it. If the battery is swallowed,
contact a physician immediately.
• Battery may explode if mistreated. Do not attempt to recharge it or disassemble
it. Do not dispose of the old battery in a fire.
iC172 IB 301207new3.p65 26/3/2008, 11:1131
To Next Page
Loading...
Need help?
General
