9
Date Display
To see the correct Date at any time, depress the MONTH/DATE button. The display
changes from Time to Month and Date (MM/DD).
For example, May 21 will appear as “5.21”.
When you release the MONTH/DATE button the
display returns to the correct Time.
Year Display
To see the correct Year, depress the
MONTH/DATE and TIME buttons together.
The display changes from Time to Year.
When you release the MONTH/DATE and TIME
buttons the display returns to the correct Time.
Daylight Saving and Leap Year Adjustments
All Daylight Saving and Leap Year adjustments are made automatically
by the SmartSet
®
internal computer as follows:
• Start of Daylight Saving Time:
At “2:00 AM” on the 2nd Sunday in March, the clock will automatically
advance to “3:00 AM”.
• End of Daylight Saving Time:
At “3:00 AM” on the 1st Sunday in November, the clock will
automatically reset to “2:00 AM”.
• Leap Year:
At “12:00 Midnight” on February 28th, the calendar display will change
to “2.29”.
iC172 IB 301207new3.p65 25/3/2008, 18:289
To Next Page
Loading...
Need help?
General
