Need help?Do you have a question about the Emerson Rosemount 1195 and is the answer not in the manual?
General| Communication Protocol | HART |
|---|---|
| Type | Differential Pressure Flow Meter |
| Output Signal | 4 to 20 mA |
| Power Supply | 10.5 to 45 VDC |
| Orifice Plate Type | Concentric, Eccentric, Segmental |
| Line Size | 1/2 in to 24 in |
| Material | Stainless Steel |
| Standard Compliance | ASME, ISO |
| Process Temperature Range | -40°C to 120°C (-40°F to 248°F) |
| Enclosure Rating | IP66 |
| Electrical Connection | 1/2 in NPT |
| Sensor Type | Differential Pressure |
| Measurement Range | Depends on orifice plate and line size |
To Next Page
