CAUTION
Do not tamper with or remove the electonices board in the
Rosemount 2088, 2090F, or 2090P. This will cause permanent
damage to the transmitter.
3.1 Electronics board
The Rosemount 2088 and 2090 electronics board should not be tampered
with or removed from the housing as it could cause permanent damage to
the transmitter.
3.2 LOI/LCD display
The LOI/LCD display can be removed and rotated as needed by following the
“Rotating LOI/LCD display” instructions in the Rosemount 2088 Reference
Manual.
Quick Start Guide March 2022
10 Emerson.com/Rosemount
To Next Page
Loading...
