Emerson Rosemount 2088 User Manual

5 Verify transmitter configuration using a Field
Communicator
Verify the configuration using any HART capable configuration tool or LOI -
option code M4. Configuration instructions for a Field Communicator and
LOI are included in this step. See Rosemount 2088 Reference Manual for
configuration instructions using AMS Device Manager.
A Rosemount 2088 DD must be installed on the Field Communicator to
verify configuration. Fast Key sequences vary depending on device and DD
revisions. Use the Determine Fast Key sequence table for the Field
Communicator user interface process below to identify the appropriate Fast
Key sequences.
5.1 Determine Fast Key sequence table for the Field
Communicator user interface
Procedure to determine the Fast Key sequence table for the Field
Communicator.
Procedure
1. Connect Field Communicator to Rosemount 2088, 2090F, or 2090P.
2. If Home screen matches Figure 5-1, refer to Table 5-1 for Fast Key
sequences.
OR
3. If Home screen matches Figure 5-2:
a) Perform Fast Key sequence 1,7,2 to identify Field Revision and
HART Revision.
b) Refer to Table 5-2 and the appropriate column based on your
Field Revision and HART Revision for Fast Key sequences.
Emerson recommends installing the latest DD to access the
complete functionality. Visit Emerson.com or FieldCommGroup.org.
Quick Start Guide March 2022
14 Emerson.com/Rosemount

Emerson Rosemount 2088 Specifications

General

Brand	Emerson
Model	Rosemount 2088
Category	Transmitter
Language	English