Table 5-1: Traditional Interface Fast Key (continued)
Function Fast Key sequence
Keypad Input 1, 2, 3, 1, 1
Loop Test 1,2, 2
Lower Range Value 4, 1
Lower Sensor Trim 1, 2, 3, 3, 2
Message 1, 3, 4, 3
Meter Type 1, 3, 6, 1
Number of Requested 1, 4, 3, 3, 2
Output Trim 1, 2, 3, 2
Percent Range 1, 1, 2
Poll Address 1, 4, 3, 3, 1
✓ Range Values 1, 3, 3
Rerange 1, 2, 3, 1
Scaled D/A Trim (4–20 mA) 1, 2, 3, 2, 2
Self Test (Transmitter) 1, 2, 1, 1
Sensor Info 1, 4, 4, 2
Sensor Trim (Full Trim) 1, 2, 3, 3
Sensor Trim Points 1, 2, 3, 3, 5
Status 1, 2, 1, 2
✓ Tag 1, 3, 1
Transmitter Security (Write Protect) 1, 3, 4, 4
✓ Units (Process Variable) 1, 3, 2
Upper Range Value 5, 2
Upper Sensor Trim 1, 2, 3, 3, 3
Zero Trim 1, 2, 3, 3, 1
Table 5-2: Device Dashboard Fast Keys
A check (✓) indicates the basic configuration parameters. At minimum, these parameters should
be verified as part of the configuration and startup procedure.
Quick Start Guide March 2022
16 Emerson.com/Rosemount
To Next Page
Loading...
