Need help?Do you have a question about the Emerson Rosemount 3408 and is the answer not in the manual?
General| Brand | Emerson |
|---|---|
| Model | Rosemount 3408 |
| Category | Transmitter |
| Language | English |
Provides critical safety warnings regarding installation, hazardous locations, and unauthorized access.
Details the procedure for mounting the flanged version of the antenna into the nozzle.
Lists torque values for tightening bolts and nuts for the process seal antenna based on connection standards.
Describes applying anti-seize and mounting the transmitter on NPT threaded connections.
Details placing a gasket and mounting the transmitter on BSPP (G) threaded connections.
Explains fitting an antenna extension for open air installations to meet requirements.
Provides prerequisites and procedure for mounting the bracket to a pipe or wall.
Details mounting the transmitter on 1¹/₂-in. BSPP (G) threaded connections using a gasket.
Specifies wire gauge, twisted pairs, and shielded wiring recommendations for environments with high EMI.
Advises using certified explosion-proof or flameproof cable glands/conduit for specific installations.
States the internal power consumption of the transmitter in normal operation.
Emphasizes proper grounding according to codes and details transmitter housing grounding methods.
Outlines proper procedures for trimming, insulating, and connecting the instrument cable shield.
Specifies the operating voltage and current limits for the transmitter.
Explains minimum loop resistance for HART communication and how maximum resistance is determined.
Presents a wiring diagram for 4-20 mA/HART® communication, identifying components.
Lists various software tools and technologies for configuring the transmitter.
Introduces Rosemount Radar Master Plus as the recommended configuration tool and its requirements.
Guides users on downloading AMS Device Configurator software for device configuration.
Advises on verifying and downloading correct device drivers (FDI/DD/DTM packages) for communication.
Explains how to use the Guided Setup wizard in FDI compliant software for basic operation.
Details the steps for wireless configuration using AMS Device Configurator via Bluetooth.
Instructs to download and install the AMS Device Configurator app from the app store.
Details the steps for wireless configuration using AMS Device Configurator via Bluetooth.
Explains where to find the Bluetooth UID and key for device security.
To Next Page
