Need help?Do you have a question about the Emerson Rosemount 3051S MultiVariable and is the answer not in the manual?
General| Accuracy | ±0.04% of span |
|---|---|
| Pressure Range | Up to 4000 psi (276 bar) |
| Communication Protocols | HART, FOUNDATION Fieldbus, PROFIBUS PA |
| Ambient Temperature Limit | -40 to 85 °C (-40 to 185 °F) |
| Power Supply (Fieldbus) | 9-32 VDC |
| Measurement Type | Temperature, Flow |
| Output | 4-20 mA HART, FOUNDATION Fieldbus |
| Temperature Range | -40 to 85°C (-40 to 185°F) |
| Material | 316L SST, Hastelloy, Monel |
| Service | Liquid, gas, steam |
| Warranty | 5 years |
| Measurement Range | 0-4000 psi |
| Process Temperature Limit | -40 to 120°C (-40 to 248°F) |
| Diagnostics | Advanced diagnostics |
| Certifications/Approvals | FM, CSA, ATEX, IECEx, SIL 2/3 |
| Process Connection | 1/2-14 NPT |
| Electrical Connection | 1/2-14 NPT, M20 |
| Enclosure Rating | IP66, NEMA 4X |
| Stability | ±0.1% of URL per 5 years |
Important guidelines and disclaimers for the user regarding the product manual.
Critical safety warnings regarding potential hazards such as explosions and electrical shock.
Guidance for mounting transmitters for liquid flow applications.
Guidance for mounting transmitters for gas flow applications.
Guidance for mounting transmitters for steam flow applications.
Information on available mounting bracket types for the transmitter.
Guidelines for assembling process flanges, manifolds, or adapters with bolts.
Information on proper installation and inspection of O-rings for flange adapters.
Procedures for identifying the device using commissioning tags.
Steps to rotate the optional LCD display on the transmitter.
Functionality of the simulate switch for alerts and status.
Functionality of the security switch for transmitter configuration.
Proper methods for signal wiring and grounding of the transmitter's shield.
Requirements for the power supply voltage for the transmitter.
Role of a power conditioner in a fieldbus segment.
Methods for properly grounding the transmitter case.
Requirement for installing terminators at the beginning and end of a fieldbus segment.
Installation instructions for the optional Pt 100 RTD sensor.
Verifying the correct device driver for proper system communication.
Information regarding conformity with European Union Directives.
Details on the transmitter's certification for ordinary location use.
Guidance for installing equipment in North American hazardous locations.
Specific explosionproof and intrinsically safe certifications for the USA.
Certifications specific to Canadian hazardous location standards.
Canada certification for explosionproof and dust ignition-proof, Division 2.
Canada certification for intrinsically safe installations.
Canada certification for FISCO intrinsically safe installations.
ATEX certification for intrinsic safety.
ATEX certification for FISCO intrinsic safety.
ATEX certification for dust environments.
ATEX certification for Type n installations.
Certifications pertaining to international standards.
IECEx certification for flameproof and dust environments.
IECEx certification for FISCO intrinsic safety.
IECEx certification for Type n installations.
Certifications specific to Brazil.
Brazil INMETRO certification for flameproof installations.
Certifications specific to China.
China certification for flameproof and dust ignition-proof.
China certification for intrinsic safety.
EAC certifications for Belarus, Kazakhstan, and Russia.
EAC certification for flameproof installations in EAC countries.
EAC certification for intrinsic safety in EAC countries.
Certifications specific to Japan.
Japan certification for flameproof installations.
Certifications specific to the Republic of Korea.
Republic of Korea certification for flameproof (HART only).
Republic of Korea certification for intrinsic safety (HART only).
Various combinations of certification codes.
Other certifications and type approvals for the product.
ABS Type Approval for marine and offshore installations.
BV Type Approval for classification of steel ships.
DNV Type Approval for classification of ships and offshore standards.
LR Type Approval for environmental categories.
To Next Page
