Need help?Do you have a question about the Emerson Rosemount 3051C and is the answer not in the manual?
General| Model | 3051C |
|---|---|
| Category | Transmitter |
| Accuracy | ±0.075% of span |
| Type | Pressure Transmitter |
| Output | 4-20 mA |
| Process Temperature | -40 to 85 °C |
| Ambient Temperature Limit | -40 to 85 °C |
| Housing Material | Aluminum |
| Wetted Materials | 316L SST |
| Process Connection | 1/2-14 NPT, 1/4-18 NPT |
| Electrical Connection | 1/2–14 NPT, PG13.5 |
| Display | LCD |
| Certifications | ATEX, IECEx, CSA, FM, SIL 2/3 |
| Warranty | 5 years |
Provides essential safety warnings for device installation and operation, including risks of explosions, leaks, and shocks.
Details the procedure for mounting the transmitter in liquid flow applications, including tap placement and orientation.
Explains how to mount the transmitter in gas flow applications, emphasizing bracket support and tap placement.
Describes the mounting procedure for steam flow applications, including filling impulse lines.
Illustrates different mounting configurations for panel and pipe installations, including coplanar and traditional flanges.
Provides guidelines for assembling process flanges and manifolds using specified bolts for optimal transmitter performance.
Details the importance of proper O-ring installation with flange adapters to prevent process leaks and ensure safety.
Provides guidance on using thread sealing PTFE tape for environmental seals on conduit entries to ensure water and dust tightness.
Explains the orientation of the in-line gauge transmitter, focusing on the low side pressure port and vent path for fluid drainage.
Provides guidance on proper grounding procedures for signal wiring, emphasizing cable shield connections and avoiding power wiring proximity.
Details the power supply requirements for the transmitter, including voltage, ripple, and resistance needs for HART communication.
Explains how to configure the transmitter wirelessly using Bluetooth technology with the AMS Device Configurator app.
Provides instructions to download and install the AMS Device Configurator application from the app store.
Details how to perform a zero trim using the transmitter's physical buttons to set the Lower Range Value (LRV).
Covers notices for European directives, FCC, ISED, and ordinary location certifications for product compliance.
Details explosion-proof, dust-ignition-proof, and intrinsic safety standards for North American markets.
Covers European ATEX and international IECEx certifications for hazardous environments.
Presents the EU Declaration of Conformity for Rosemount 3051 Pressure Transmitters, stating compliance with EU directives.
Presents the China RoHS compliance table for hazardous substances in 3051 parts and lists spare parts descriptions.
To Next Page