Emerson Rosemount 3051C - About this guide; Safety messages

1 About this guide
This guide provides basic guidelines for Rosemount 3051
Transmitters.
It does not provide instructions for configuration, diagnostics,
maintenance, service, troubleshooting, explosion-proof, flameproof,
or Intrinsically Safe (IS) installations. Refer to the Rosemount 3051
Pressure Transmitter Manual for more instructions. This guide and
the referenced manual are also available on Emerson.com/global.
1.1 Safety messages
WARNING
Explosions
Explosions could result in death or serious injury.
Installation of device in an explosive environment must be in
accordance with appropriate local, national, and international
standards, codes, and practices. Review for any restrictions
associated with a safe installation.
Before connecting a communication device in an explosive
atmosphere, ensure that the instruments are installed in
accordance with intrinsically safe or non-incendive field wiring
practices.
In an explosion-proof/flameproof installation, do not remove the
transmitter covers when power is applied to the transmitter.
WARNING
Process leaks
Process leaks may cause harm or result in death.
To avoid process leaks, only use the O-ring designed to seal with
the corresponding flange adapter.
WARNING
Electrical shock
Electrical shock can result in death or serious injury.
Avoid contact with the leads and terminals. High voltage that may
be present on leads can cause electrical shock.
February2024 Quick Start Guide
Quick Start Guide 3