Need help?Do you have a question about the Emerson Rosemount 300S WirelessHART and is the answer not in the manual?
General| Communication Protocol | WirelessHART |
|---|---|
| Frequency Band | 2.4 GHz |
| Type | WirelessHART Pressure Transmitter |
| Measurement Range | Varies by sensor |
| Power Supply | Battery-powered |
| Battery Life | Up to 10 years |
| Operating Temperature | -40 to 85 °C |
| Enclosure Rating | Type 4X, IP66 |
| Enclosure | Aluminum |
| Hazardous Area Certification | ATEX, IECEx, CSA |
| Update Rate | 1 sec to 60 min (user configurable) |
| Range | Varies by model (e.g., 0-100 psi, 0-1000 psi) |
| Output | WirelessHART data |
Details powering up wireless devices relative to the Wireless Gateway.
Describes connecting a Field Communicator to the transmitter.
Mounting instructions for transmitters in liquid flow applications.
Mounting instructions for transmitters in gas flow applications.
Mounting instructions for transmitters in steam flow applications.
Explains performing a zero trim for compensating mounting effects.
Interpreting status messages and diagnostic information on the local LCD.
Guidance on resolving issues when the device is not joined to the network.
To Next Page