D
dwilsonAug 12, 2025
What to do if input register SentMessages does not enumerate on Emerson Switch?
- AAmy MooreAug 12, 2025
If the input register SentMessages does not enumerate, ensure that the host is sending proper requests.
To Next PageTo Next PageWhat to do if input register SentMessages does not enumerate on Emerson Switch?
If the input register SentMessages does not enumerate, ensure that the host is sending proper requests.
What to do if input register MessagesToMe does not enumerate on Emerson Switch?
If the Input register MessagesToMe does not enumerate, check that the Sakura address is correct.
What to do if there is no communication with Emerson Switch tank hub using the Sakura bus, but the tank hub is receiving Sakura requests?
If there is no communication with the tank hub using the Sakura bus, but the tank hub is receiving Sakura requests, the host Sakura address might not be the same as configured in the tank hub, or the tank hub is responding too fast. Try changing the RxToTx time (see Table 5-12).
What to do if input register RecMessages does not enumerate on Emerson Switch?
If the input register RecMessages does not enumerate, verify that the Sakura cables are properly connected and that the tank hub is in Sakura mode.
General| Measurement Principle | Radar |
|---|---|
| Accuracy | ±3 mm |
| Resolution | 1 mm |
| Process Pressure | Up to 40 bar (580 psi) |
| Output Signal | 4–20 mA HART, FOUNDATION Fieldbus |
| Protection Class | IP66/IP67 |
| Process Connection | Threaded, Flanged |
| Housing Material | Aluminum, Stainless Steel |
| Communication Protocol | HART, FOUNDATION Fieldbus |
| Enclosure Rating | Type 4X, IP66/67 |
