Remote electronics installationFigure 2-7:
K
L
M
N
O
P
J
I
B
H
C
D
F
E
G
A
A. Meter body
B. Support tube
C. Sensor cable nut
D. Nut
E. Washer
F. Union
G. Meter adapter
H. Coaxial cable
I. 1/2 in. NPT conduit atapter or cable gland (supplied by customer)
J. Electronics housing
K. Ground connection
L. Housing base screw
M. Housing adapter
N. Housing adapter screws
O. 1/2 in. NPT conduit adapter or cable gland (supplied by customer)
P. Coaxial cable nut
Prerequisites
1. Mount the meter body in the process flow line as described in Section 2.1.
2. Mount the bracket and electronics housing in the desired location. The
housing can be repositioned on the bracket to facilitate field wiring and
conduit routing.
April 2018
Quick Start Guide
Quick Start Guide 9
To Next Page
Loading...
