Emerson Rosemount 975 - Assign Address to Device; Switch Device Address

3.3 Assign address to device
Procedure
1. In the Address pane, select the New Address for the Detector radio button.
2. Use the Address dropdown to select the required address.
3. Click the Set New button.
3.4 Switch device address
Procedure
1. In the Address pane, select the Switch to Detector radio button.
2. Use the Address dropdown to select the required address.
3. Click the Switch button.
Note
Alternatively, the up and down arrows can be used to switch the address without
clicking the Switch button.
Operation
Reference Manual
June 2021 00809-1500-4975
16 Emerson.com