1 Introduction
1.1 Product overview
Modbus
®
Manager is a customized software based on Modbus and RS485, used to
configure the device to suit the customer needs, perform firmware upgrades and provide
troubleshooting information and functionality.
This guide describes the Modbus Manager and provides instructions on how to install,
operate, and maintain the software.
Note
The Modbus Manager software is for use with Rosemount 975 models only.
1.2 Minimum requirements
The minimum requirements for operating the Modbus Manager are as follows:
• Pentium
®
3GHz
• Microsoft
®
Windows
™
XP, 7, 8, or 10
• 2GB RAM
• 10GB hard disk free space
• Isolated RS-485 interface card to be defined as COM or an RS-485 converter to connect
to a standard COM port
Reference Manual Introduction
00809-1500-4975 June 2021
Rosemount 975 7
To Next Page
Loading...
