Procedure
To adjust number of records shown, change the number in the Get field and then press the
Get button.
A. Displays records according to selection in the records up to current position field
B. Scrolls up by page
C. Scrolls down by page
D. Scrolls up by line
E. Re-read by line
F. Select which records will be displayed when clicking Get button
G. Opens selected number of most recent records in .txt format
3.9 Detector setup
The detector is setup using the Detector Setup screen, in which configurable options, BIT
settings, Accessory Relay Options, Detection Options, Lock Option, and 4-20 Settings can
be changed.
Note
4-20mA settings – for fault mode, the default indication is 1mA, but may be changed to
0mA. To preserve the HART
®
communication, this is not recommended for customers
using a HART connection.
Reference Manual Operation
00809-1500-4975 June 2021
Rosemount 975 21
To Next Page
Loading...
