Need help?Do you have a question about the Emerson Roxar and is the answer not in the manual?
General| Category | Multiphase Flow Meter |
|---|---|
| Type | Roxar |
| Application | Oil and gas production |
| Operating Temperature | -40°C to +85°C |
| Flow Rate Range | Varies depending on model and configuration |
| Water Cut Measurement Range | 0% to 100% |
| Gas Void Fraction Measurement Range | 0-100% |
| Accuracy | ±5% of reading |
| Materials | Stainless steel |
| Communication | Modbus, Ethernet |
| Power Supply | 24 V DC |
| Weight | Varies depending on model and configuration |
| Dimensions | Varies depending on model and configuration |
| Certifications | ATEX, IECEx |
| Sensors | Differential pressure transmitters, gamma densitometer |
| Measurement Principle | Combination of gamma-ray absorption, capacitance, and differential pressure measurements |
Explains manual structure, safety, and contact information for users.
States compliance with international standards for user manual documentation.
Lists and defines common abbreviations and terms used in the document.
Defines criteria for hazard messages (DANGER, WARNING, CAUTION, NOTICE) based on ANSI standards.
Outlines operator requirements: training, certification, and necessary Personal Protective Equipment (PPE).
Details limitations and exclusions of the product warranty, including shipping damage.
Lists other relevant documents and resources for further information.
Provides contact information for product support and technical queries.
Introduces the Roxar Mechanical Retrieval Tool kit and its primary applications.
Details the telescopic, pressure-balanced design of the mechanical retrieval tool.
Describes the Roxar Service Valve, its double isolating type, and compatibility.
Explains the function of hand pressure pumps in manual operation and pressure surge prevention.
Covers essential checks and verifications before initiating retrieval operations, including site and permits.
Lists required tools and equipment for operation, with specifications and quantities.
Identifies necessary consumables for performing retrieval operations, including packing and o-rings.
Step-by-step procedure for safely removing a device from a pressurized pipe.
Step-by-step procedure for safely installing a device into a pressurized pipe.
Offers guidance for qualified personnel on troubleshooting common issues like loose plugs or stuck valves.
Outlines necessary operator qualifications, training, and certification for safe operation.
Provides general instructions for tool checks before use after storage.
Describes daily checks to ensure the tool is in good condition before use.
Details on-site pressure testing procedures required for the retrieval tool.
Procedures for disassembling, cleaning, and checking the tool and valve after use.
Recommends a full inspection every two years for the tool and service valve.
Guidelines for preserving, storing, and maintaining the equipment during storage.
Lists available spare parts for the mechanical retrieval tool.
Lists available spare parts for the service valve.
Lists spare parts for miscellaneous items related to the tool.
Assembly drawing for the Roxar Mechanical Retriever, showing part references.
To Next Page