Need help?Do you have a question about the Emerson SKA1200037 and is the answer not in the manual?
Essential safety hazard avoidance information.
General warning about severe electrical shock risks from drive voltages.
Safe system design, installation, commissioning, and maintenance by trained personnel.
Specifics on electric shock risks, isolation, stored charge, and ground leakage.
Requirements for drive mounting enclosures and fire protection measures.
Diagrams for power terminal connections for Size A and Sizes B, C, D drives.
Details on drive ground leakage currents with internal EMC filter.
Overview of keypad and display usage for drive status and parameter management.
Explanation of the function of programming and control keys on the keypad.
Step-by-step guide for navigating and modifying drive parameters.
How parameters are saved and status indicators for the drive.
Description of parameter access levels controlled by Pr 10 and security settings.
Procedures for setting, unlocking, and re-locking security codes.
Steps to restore the drive's parameters to factory default settings.
Detailed descriptions for Level 1 parameters related to basic drive setup.
Explanation and diagrams for AI.AV drive configuration.
Diagrams for AV.Pr and Al.Pr drive configurations.
Diagrams for Pr and PAd drive configurations.
Setting motor rated current, speed, and voltage for correct operation.
List of read-only parameters for fault diagnosis.
Minimum required control terminal connections for terminal control mode.
Steps for preparing the drive, powering up, and performing autotune.
Steps for preparing the drive, powering up, and performing autotune via keypad.
Table listing trip codes, their conditions, and potential causes.
To Next Page
General